Cardinal 825 - Date and Time Configuration; Setting the Date;Time Parameter

8545-M838-O1 Rev D  825 Installation & Technical
43
SETUP AND CALIBRATION, CONT.
1. Date/Time
With the Setup Menu displayed, press the 1 key or use the Navigation Keys to select
(highlight) 1. Date/Time and then press the ENTER key. The display will change to
show the Set Date/Time screen.
Year:
With the Set Date/Time screen displayed the current setting for the Year: parameter will
be shown. If the setting displayed is acceptable, proceed to the next parameter.
Otherwise, use the numeric keys to enter the year (e.g., 2008) and then press the 
Down Arrow to advance to the next parameter or press the ENTER key to save the new
setting and return to the previous screen.
Month:
With the Set Date/Time screen displayed the current setting for the Month: parameter
will be shown. If the setting displayed is acceptable, proceed to the next parameter.
Otherwise, use the numeric keys to enter the month (1 = Jan, 2 = Feb...12 = Dec) and
then press the  Down Arrow to advance to the next parameter or press the ENTER key
to save the new setting and return to the previous screen.
Day:
With the Set Date/Time screen displayed the current setting for the Day: parameter will
be shown. If the setting displayed is acceptable, proceed to the next parameter.
Otherwise, use the numeric keys to enter the day of the month (1 to 31) and then press
the  Down Arrow to advance to the next parameter or press the ENTER key to save the
new setting and return to the previous screen.