Cardinal 825 - Page 50

8545-M838-O1 Rev D  825 Installation & Technical
44
SETUP AND CALIBRATION, CONT.
Hour:
With the Set Date/Time screen displayed the current setting for the Hour: parameter will
be shown. If the setting displayed is acceptable, proceed to the next parameter.
Otherwise, use the numeric keys to enter the hour in 24 hour time (e.g., 3 p.m. = 15) and
then press the  Down Arrow to advance to the next parameter or press the ENTER key
to save the new setting and return to the previous screen.
Minute:
With the Set Date/Time screen displayed the current setting for the Minute: parameter
will be shown. If the setting displayed is acceptable, proceed to the next parameter.
Otherwise, use the numeric keys to enter the minutes (0 to 59 ) and then press the 
Down Arrow to advance to the next parameter or press the ENTER key to save the new
setting and return to the previous screen.
Second:
With the Set Date/Time screen displayed the current setting for the Second: parameter
will be shown. If the setting displayed is acceptable, press the ENTER key or the
Navigation Keys  Left Arrow to return to the previous screen.
Otherwise, use the numeric keys to enter the seconds (0 to 59) and then press the
ENTER key to save the new setting and return to the previous screen.