Cardinal 825 - Ticket Settings Management; Ticket Settings Configuration

8545-M838-O1 Rev D  825 Installation & Technical
101
TICKET SETTINGS
With the Application Menu displayed, press the U key or use the Navigation Keys to select
(highlight) Configuration and then press the ENTER key. The display will change to show
the Configuration screen.
Ticket Settings
With the Configuration screen displayed, press the T key or use the Navigation Keys to
select (highlight) Ticket Settings and then press the ENTER key. The display will
change to show the Configure Ticket screen.
Configure Ticket
1. Standard
6. Special 2
2. Alternate
7. Special 3
3. First Pass
8. Special 4
4. Log
9. Special 5
5. Special 1
A. Special 6
NOTE: The setup parameters for the following tickets are the same.
1. Standard
4. Log
7. Special 3
A. Special 6
2. Alternate
5. Special 1
8. Special 4
3. First Pass
6. Special 2
9. Special 5
After selecting the desired ticket to configure, refer to the following steps and parameters.
With the Configure Ticket screen displayed, press the key corresponding to the ticket to be
configured and then press the ENTER key or use the Navigation Keys to select (highlight) the
ticket to be configured and then press the ENTER key. The display will change to show the
selected configure ticket screen.
Format:
With the configure ticket screen displayed, the current setting for Format: will be shown.
If the setting displayed is acceptable, press the  Down Arrow to advance to the next
parameter or press the ENTER key to return to the previous screen.
Otherwise, use the alphanumeric keys to enter the form name to use (up to 8 characters)
and then press the  Down Arrow to advance to the next parameter or press the ENTER
key to save the new setting and return to the previous screen.