Cardinal 825 - Setting the Default Operator

8545-M838-O1 Rev D  825 Installation & Technical
88
OPERATORS, CONT.
5. Set Default Operator
The Set Default Operator screen allows to you to select which operator login the 825 will
use when it is first turned on.
With the Setup Operators screen displayed, press the 5 key or use the Navigation Keys to
select (highlight) 5. Set Default Operator and then press the ENTER key. The
display will change to show the Set Default Operator screen and the current default
operator login (name).
Default Login:
With the Set Default Operator screen displayed, the current login (name) will be shown.
If the login displayed is acceptable, press the ENTER key to return to the Setup
Operators screen.
Otherwise, use the alphanumeric keys to enter a new login for the default operator login
and then press the ENTER key to return to the Setup Operators screen.