8545-M838-O1 Rev D 825 Installation & Technical
CONFIGURATION, CONT.
Configuration of Weight Server Complete
To return to the Weight Screen and resume normal weighing operations, with the Select
Serial screen (or the Select TCP/IP Server screen) displayed, press the Navigation Keys
Left Arrow two (2) times. The display will change to show the Restart Weight Server screen.
1. With the Restart Weight Sever screen displayed, the current setting
Restart Weight Server: N will be shown. If you are finished with the Configuration
parameters, press the SPACE key to toggle its status from No to Yes and then press the
ENTER key to restart the weight server.
Otherwise, press the ENTER key to return to the Configuration screen.
2. The display will change to show:
Stopping weight server
and then show:
Starting weight server
and then change to show the Configuration screen.
3. With the Configuration screen displayed, press the Navigation Keys Left Arrow to return
to the Application Menu.
4. With the Application Menu displayed, press the key corresponding to the application to run
and then press the ENTER key or use the Navigation Keys to select (highlight) the
application to run and then press the ENTER key.
5. The application will be loaded and the display will change to the application screen.
Restart Weight Server
Restart Weight Server: N
Restart the weight server
To Next Page
Loading...
