8545-M838-O1 Rev D 825 Installation & Technical
SETUP AND CALIBRATION, CONT.
3. Calibration
With the Setup Menu displayed, press the 3 key or use the Navigation Keys to select
(highlight) 3. Calibration and then press the ENTER key. The display will change to
show the Setup Scale Number screen.
Scale Number:
With the Setup Scale Number screen displayed, the current setting for the Scale Number:
will be shown. If the setting displayed is acceptable, press the ENTER key to proceed to the
next screen or the Navigation Keys Left Arrow to return to the previous screen.
Otherwise, use the numeric keys to enter the scale number to configure and/or calibrate and
then press the ENTER key to save the new setting and proceed to the next screen.
The display will briefly show:
Waiting for parameters
Waiting for multi interval
settings
and then change to show the Scale 1 – Calibrations Options screen.
Hardware calibration enabled
To Next Page
Loading...
