Cardinal 825 - Configure Tabs Page

8545-M838-O1 Rev D  825 Installation & Technical
105
TICKET SETTINGS, CONT.
Configure tabs page 3
With the Configure tabs page 2 screen displayed, press the ENTER key to advance to the
Configure tabs page 3 screen.
If the setting displayed for each label is acceptable, press the ENTER key to advance to the
Configure tabs page 4 screen or press the press the  Left Arrow to return to the
previous screen.
Otherwise, use the numeric keys to enter the Row, Col and Len, pressing the  Right Arrow
to advance between each parameter and then press the  Right Arrow to advance to the
Label. Use the alphanumeric keypad for the Label characters.
Press the  Down Arrow to advance to the next parameter.
NOTE: Use the  UP Arrow key to “backup” to the previous coordinate or parameter.