8545-M838-O1 Rev D 825 Installation & Technical
CONFIGURATION, CONT.
Configuration
3. With the Application Menu displayed, press the U key or use the Navigation Keys to
select (highlight) Configuration and then press the ENTER key. The display will
change to show the Configuration screen.
Calibrate touch screen
With the Configuration screen displayed, press the C key or use the Navigation Keys to
select (highlight) Calibrate touch screen and then press the ENTER key. The display
will change to show the Touch screen calibration screen.
1. With the Touch screen calibration screen displayed, the target, a plus sign “” will be
shown in the upper left corner of the display.
Configuration
Calibrate touch screen
Show Touch Screen Tracking
Set Color Settings
Configure Weight Server
Ticket Settings
Configure Menu
Set Factory Defaults
+
Touch screen calibration
Touch target or press ESC to quit
To Next Page
Loading...
