8545-M838-O1 Rev D 825 Installation & Technical
CONFIGURATION, CONT.
2. Press the target firmly and accurately at each location on the screen. The target will
continue to move until the screen is calibrated.
NOTE: Best accuracy will be obtained using a stylus (e.g. from a touch screen
tablet, phone or computer).
Show Touch Screen Tracking
With the Configuration screen displayed, press the R key or use the Navigation Keys to
select (highlight) Show Touch Screen Tracking and then press the ENTER key. The
display will change to show a tracking screen. Note that the screen will be blank except for
a message (Press [ESC] exit) at the top center of the display.
To Next Page
Loading...
