8545-M838-O1 Rev D 825 Installation & Technical
EVENT COUNTERS, CONT.
3. With the Legal metrology information / Setup displayed, press the 1 key or press the
ENTER key. The display will change to show the Event Counters screen.
4. After viewing the Event Counters, press the P key to print the counters (using COM1 at the
default baud rate) or press any key to return to the Legal metrology information /
Setup screen.
Return to Normal Operations
To return to the Weight Screen and resume normal weighing operations, with the Legal
metrology / Setup screen displayed, press the Navigation Keys Left Arrow to return to the
Startup screen.
To Next Page
Loading...
