Cardinal 825 - Page 120

8545-M838-O1 Rev D  825 Installation & Technical
114
SET FACTORY DEFAULTS, CONT.
Confirm Set Defaults
After pressing the Y key to proceed with setting the indicator back to the factory defaults,
the display will change to show the first of six (6) Confirm Set Defaults screens.
Press the E key to proceed to the next Confirm Set Defaults screen.
Otherwise, press any other key to cancel and return to the Configuration screen.
Press the R key to proceed to the next Confirm Set Defaults screen.
Otherwise, press any other key to cancel and return to the Configuration screen.
Press the A key to proceed to the next Confirm Set Defaults screen.
Otherwise, press any other key to cancel and return to the Configuration screen.
Press the S key to proceed to the next Confirm Set Defaults screen.
Otherwise, press any other key to cancel and return to the Configuration screen.
Press the E key to proceed to the next Confirm Set Defaults screen.
Otherwise, press any other key to cancel and return to the Configuration screen.