CAS CL5000 Series - 2.14 Programming Scale Configuration

104
2.14 Programming Scale Configuration
2.14.1 Scale Configuration (Menu code 1800)
(MENU -> 8. Scale Config)
This chapter explains how to configure the scale. The main menu of “Scale
Configuration” is shown as below.
2.14.2 Sale Mode (Menu code 1810)
(MENU -> 8. Scale Config -> 1.Sale Mode)
This section is to select sale mode, which have six different modes in the following
table.
▶ Sale Modes
No. Sale Modes Description
1 REG: Ticket & Floating
Selecting Ticket and Floating Clerk Mode.
2 REG: Label
Selecting label Mode.
3 REG: Prepack
Selecting Prepack Mode.
4 REG: Label & Floating
Selecting Label and Floating Clerk Mode.
5 Manager
Selecting Manager Mode
6 Repack
Selecting Repack Mode (In this mode, report is not updated.)
7 Self Service & Label
Selecting Self Service Mode (In this mode, you can use speed
key and some keys. If you want to finish this mode, while
pressing MENU key, enter system password and PRINT key)
SCALE CONFIG (1/3)
1.Sale Mode
2.Operation Mode
3. Department
SCALE CONFIG (2/3)
4. Date/Time
5.User/Security Configuration
6.Test
SCALE CONFIG (3/3)
7.Scale Parameter
8.Function Key Define