CAS CL5000 Series - List Department (Menu Code 1212); Delete Department (Menu Code 1213); Group (Menu Code 1220)

48
2.2.3 List Department (Menu code 1212)
(MENU -> 2. PLU Data Table I -> 1.Department -> 2. List )
※ If you want to print list, press the TEST key.
2.2.4 Delete Department (Menu code 1213)
(MENU -> 2. PLU Data Table I -> 1.Department -> 2. Delete )
2.2.5 Group (Menu code 1220)
(MENU -> 2. PLU Data Table I -> 2.Group)
This menu is to group any PLU(s) regardless the PLU’s “department”. Any individual
PLU must be involved in any department, but not in any group. User may select any
PLUs as a group at users’ needs. Especially, grouping PLU(s) can be used to get total
sum for a specific.
1. Set the department range that you wish to
see.
EX) Department 1 to 10
LIST DEPARTMENT (1/1)
- Start Number : [ 1]
- End Number : [ 10]
List All-press [SAVE] key
PRINT
1
PRINT
0 1
No. Reference(descript)
1 1 Default
2 1 GROCERY
1. Enter Department number
EX) Delete department 2
DELETE DEPARTMENT (1/1)
Department No. : [ 2] GROCERY
PRINT
2