CAS CL5000 Series - 2.5 Global Discount Programming

73
2.5 Global Discount Programming
2.5.1 Global Discount (Menu code 1530)
(MENU -> 5. Global Setting -> 3.Discount)
You can apply same discount regardless of PLU.
2.5.2 Priority Setting (Menu code 1531)
(MENU -> 5.Global -> 3.Discount -> 1.Priority)
You can set discount type. Refer to Discount Priority Setting Table as below..
You can see discount information on the display by setting of menu 1871 and also you
can check it on a label. (See chapter 2.14.21)
▶ Discount
Priority Setting
No Type Description
0 No Discount No discount applied
1 PLU Discount PLU discount only applied
2 Global Discount Global discount only applied
3 No Discount in
PLU then Global
PLU discount is applied. If there is no PLU discount, apply
global discount
2.5.3 Weight/Count/PCS Discount (Menu code 1532/1533/1534)
If you want to apply same discount regardless of PLU, you can set discount
information in menu code, 1532, 1533 and 1544. Refer to Discount Programming on
chapter 2.4.2
Global Discount condition by weight Item (Menu code 1532)
(MENU -> 5.Global -> 3.Discount -> 2.Weight discount)
Global Discount condition by Count Item (Menu code 1533)
(MENU -> 5.Global -> 3.Discount -> 3.Count discount)
Global Discount condition by PCS Item (Menu code 1534)
(MENU -> 5.Global -> 3.Discount -> 4.PCS discount)