CAS CL5000 Series - X1 X2 PLU Report (Menu Code 16121632)

121
2.15.5 X1/X2 PLU Report (Menu code 1612/1632)
(MENU -> 6. Report -> 1.X1 Report/3.X2 Report -> 2. PLU Report)
X
1 PLU SALES REPORT (1/1)
Dept[ 1]
PLU[ 1]..to[99999]
Press “2” key on X1/X2 Report menu screen.
2
X
1 PLU SALES REPORT (1/1)
Dept[ 1]
PLU[ 1]..to[ 10]
Enter PLU range to check.
EX) dept 1, plu 1 ~10
PRINT
1 1 1 0
PRINT
X
1 PLU SALES REPORT (1/1)
Count:261
Total:$4867.23
[TEST]=print
PLU sales report is shown on the display by
pressing “PRINT” key.
X
1 PLU SALES REPORT (1/1)
Count:261
Total:$4867.23
Waiting..
To print report, press “
T
ES
T
”
key.
TEST
Do you want to print on label?
1=Yes, 0=No
* If your scale is in label mode, the scale shows
“Do you want to print on label?”.
If your label has gap, press 1. if you want to
print report on ticket, press 0 and change the
setting to Ticket in menu 1731 then change your
label to ticket.
“Do you want to print on label?” message is
displayed depending on the setting of menu 1862
“Confirm Prt Report on Label”
If you print report in label mode, rewind motor
does not operated so you remove label and then
press the PEED key.
PRINT
X
1 REPORT (1/3)
1. Scale
2. PLU
3. Misc. PLU
To exit this menu, press “ ESC” key.
ESC
Note: PLU with no sales is not printed.