CAS CL5000 Series - 2.2 Programming PLU Data Table I

47
2.2. Programming PLU Data Table I
2.2.1 Department (Menu code 1210)
(MENU -> 2. PLU Data Table I -> 1.Department)
If a scale is assigned to department 1 then all of the PLUs that you select on that scale
will be from department 1. You can assign the department by pressing MENU, 8 and 3
keys. If you want to change the department assignment of the scale, you have to
change the setting. You also have to set Speed key for this department.
2.2.2 New/Edit Department (Menu code 1211)
(MENU -> 2. PLU Data Table I -> 1.Department -> 1. New/Edit )
※ You can press the SAVE key at anytime to save the current data and if you want to exit
without saving, press the ESC key.
1. Department Number
Department number is available 1 to 99.
EX) Department No. = 2
NEW/ EDIT DEPARTMENT (1/2)
Department No. : [ 2 ]
2. Department Description
EX) Department Decription = GROCERY
NEW/ EDIT DEPARTMENT (2/2)
Description : [ GROCERY ]
Speed Key Set No: [ ]
PRINT
2
PRINT
G R O C E R Y
3. Speed Key Setting
Refer to 2.6.1 Speed Key
EX) Speed key set no. = 1
NEW/ EDIT DEPARTMENT (2/2)
Description : [ GROCERY ]
Speed Key Set No: [ 1 ]
PRINT
1