CAS CL5000 Series User Manual

166
3.19.2 Coupled PLU Function
Automatically coupled PLU is called up after transaction.
You can use this function when you sell two or more items as package.
☞ To use this function, you have to set coupled department and coupled PLU when
you create PLU.
3.19.3 Linked PLU Function
You can use this function when you sell two or more items at a time.
☞ To use this function, you have to set linked department and linked PLU when you
create PLU.
3.20 Sales Operation Control Parameters
3.20.1 Fixed Weight
- You can set fixed weight when you create PLU
If you call up this PLU, the weight is not changed.
- You can use IN WEIGHT key.
Call up a PLU and enter a fixed weight by using OVERRIDE key and press IN
WEIGHT key.
3.20.2 Prepack Without Report
The transaction data is not added to report while using prepack mode.
- You have to set Parameter 597(Prepack report) to use this function. Also,
Parameter 596 should be set to Y

CAS CL5000 Series Specifications

General

Power Source	AC adapter
Auto Calibration	Yes
Tare Function	Yes
Unit Conversion	Yes
Interfaces	RS-232
Operating Temperature	-10°C to 40°C
Weighing Units	kg, g
Approval	NTEP, OIML