CAS CL5000 Series - List Barcode (Menu Code 1262); Delete Barcode (Menu Code 1263); Tare (Menu Code 1270)

57
2.2.23 List Barcode (Menu code 1262)
(MENU -> 2. PLU Data Table I -> 6.Barcode -> 2. List )
※ If you want to print list, press the TEST key.
2.2.24 Delete Barcode (Menu code 1263)
(MENU -> 2. PLU Data Table I -> 6.Barcode -> 3. Delete )
2.2.25 Tare (Menu code 1270)
(MENU -> 2. PLU Data Table I -> 7.Tare)
If Parameter 584 option (Use Tare No.) is “Yes” you can use this tare number which is
set here when you create PLU, If it is set to “No” you have to program tare weight again.
1. Set the list range
Set the range of barcode that you wish to check
EX) 1~10
LIST BARCODE (1/1)
- Start Number : [ 1]
- End Number : [ 10]
List All – Press [SAVE] Key
PRINT
1
PRINT
0 1
No. Reference(descript)
1 GGIIIIIPPPPPC EAN13-1
1. Enter barcode number to delete
EX) Delete barcode 1.
DELETE BARCODE (1/1)
Barcode No : [ 1]
PRINT
1