CAS CL5000 Series - List Cutting Hall (Menu Code 1362); Delete Cutting Hall (Menu Code 1363)

80
2.10.3 List Cutting Hall (Menu code 1362)
(MENU -> 3. PLU Data Table II -> 6.Cutting Hall -> 2. List )
※ If you want to print list, press the TEST key.
2.10.4 Delete Cutting Hall (Menu code 1363)
(MENU -> 3. PLU Data Table II -> 6.Cutting Hall -> 3. Delete )
2. Enter cutting hall information
Enter cutting hall name or registered number.
EX) Cutting hall registered number = KSH12
PRINT
2 1 H C K
X
ESC
4. Exit menu
If you want to exit, press “ESC” key.
1. Set the list range
Set the list range to check
EX) 1~10
LIST CUTTING HALL (1/1)
- Start Number : [ 1]
- End Number : [ 10]
List All – press [SAVE] key
PRINT
1
PRINT
0 1
No. reference(descript.)
1 1 : KCH12
1. Enter cutting hall number to delete
EX) Delete cutting hall no. 1
DELETE CUTTING HALL (1/1)
Enter Cutting Hall No. : [ 1]
PRINT
1
3. Cutting hall Country number
You can use contry number which is programmed at
menu 1341 (See page 74)
EX) Cutting Hall Country no. = 1. KOREA
PRINT
1
NEW/EDIT CUTTING HALL (1/1)
Enter Cutting Hall House No. : [ 1]
Hall : [KCH12 ]
Country : [ 0]
NEW/EDIT CUTTING HALL (1/1)
Enter Cutting Hall House No. : [ 1]
Hall : [KCH12 ]
Country : [ 1]