CAS CL5000 Series - Date & Time (Menu Code 1840)

107
2.14.5 Date & Time (Menu code 1840)
(MENU -> 8. Scale Config -> 4.Date/Time )
This section is to set scale’s DATE & TIME appropriately.
☞
Please refer to “ASCII Code Table” (chapter 4.4) to input special characters in Date or
Time separator.
1. Select “DEPARTMENT No.” and “STORE ID”.
EX) DEPARTMENT No.= 2 (Grocery)
S
T
O
RE N
o
.= 1
(
Br
a
n
c
h #1
)
DEPARTMENT (1/1)
Dept No. : [2] Grocery
Store No. : [1] Branch #1
2
PRINT
1
PRINT
1. Set appropriate “DATE”, “TIME”, and “MONTH
FORMAT”.
EX) DATE= [07.02.04]
TIME= [10:30:00]
Month Format= [1]
DATE / TIME (1/3)
Date : [07.02.04] DD-MM-YY
Time : [10:30:00]
Month Format (0=DEC, 1=12) : [ 1 ]
4. Press “PRINT” key to save it and go out to
SCALE CONFIGURATION main menu.
SCALE CONFIGURATION (1/2)
1. Sale Mode
2. Operation Mode
3. Department
PRINT
2. Set “YEAR FORMAT”,“TIME FORMAT” and
separator for “DATE”.
EX) Year Format (0=2001, 1=01) = [1]
Time Format(0~3) = [1]
Date Separator= [-]
DATE / TIME (2/3)
Year Format (0=2001, 1=01) : [ 1 ]
Time Format (0~3) : [ 1 ]
Date Separator : [ - ]
3. Set separators for “DATE”, using ASCII code
table on page
EX) Time Separator= [:]
DATE / TIME (3/3)
Time Separator : [ : ]