135
3. SALES OPERATION
3.1 Basic Operation
This chapter explains basic operation of scale, such as how to set zero, tare, call up
a PLU and override unit price in CL5000 series. In order to make sales transaction user
should access REGISTRATION mode.
■ How to access REGISTRATION MODE: Turn ON the scale.
3.2 Zero
You can use the ZERO key to correct for a deviation from zero as long as there are no PLUs
or MISC PLUs called-up. The weight can sometimes drift from zero due to debris on the
platter, leaving objects on the platter for excessive periods of time, or other environmental
factors. To correct this, remove everything from the platter and press the ZERO key when
the stable indicator “▼” is on. Below is a possible zero drifted state that should be
corrected by simply pressing the ZERO key
.
② Press “ZERO” key to set initial zero.
ZERO
① EX) Initial weight displayed => 0.002.
0.000
0.00
0.00
0.000
11:29 AM
11:29 AM
0.000
0.00
0.00
0.002
11:29 AM
0.000
0.00
0.00
0.000
To Next Page
Loading...
