CAS CL5000 Series - List Traceability (Menu Code 1332); Delete Traceability (Menu Code 1333)

76
2.7.3 List Traceability (Menu code 1332)
(MENU -> 3. PLU Data Table II -> 3.Traceability -> 2. List )
※ If you want to print list, press the TEST key.
2.7.4 Delete Traceability (Menu code 1333)
(MENU -> 3. PLU Data Table II -> 3.Traceability -> 3. Delete )
X
ESC
5. Slaughter house numer
EX) Slaughter house No. = 12. BILLY’S
Note : To program slauter house, see page 76 (2.9 Slauter
house programming).
6. Cutting hall number
EX) Cutting hall No. = 23. HAN’S CUT
7. Exit menu
If you want to exit, press “ESC” key.
PRINT
2 1
NEW/EDIT TRACEABILITY (3/3)
Slaughter House No. : [ 12]
Cutting Hall No. : [ 1]
BILLY’S
NEW/EDIT TRACEABILITY (3/3)
Slaughter House No. : [ 12]
Cutting Hall No. : [ 23]
HAN’S CUT
PRINT
3 2
1. Set the list range
Set the list range to check
EX) 1~10
LIST TRACEABILITY (1/1)
- Start Number : [ 1]
- End Number : [ 10]
List All – press [SAVE] key
PRINT
1
PRINT
0 1
No. Traceability
1 : 99 : 12 : 23 : SIRLOIN
1. Enter traceability number to delete
EX) Delete traceability no. 2
DELETE TRACEABILITY (1/1)
Traceability No : [ 2]
PRINT
2