CAS CL5000 Series - 2.9 Programming Slaughter House

78
2.8.4 Delete Country (Menu code 1343)
(MENU -> 3. PLU Data Table II -> 4.Country -> 3. Delete )
2.9 Programming Slaughter House
2.9.1 Slaughter House (Menu code 1350)
(MENU -> 3. PLU Data Table II -> 5.Slaughter House)
You can use slaughter house data when you program traceability.
2.9.2 New/Edit Slaughter House (Menu code 1351)
(MENU -> 3. PLU Data Table II -> 5.Slaughter House -> 1. New/Edit )
※ You can press the SAVE key at anytime to save the current data and if you
want to exit without saving, press the ESC key.
1. Enter country number to delete
EX) Delete country no. 1
DELETE COUNTRY (1/1)
Enter Country No : [ 1]
PRINT
1
2. Enter Slaughter House
Enter slaughter house name or registered number.
EX) Slaughter house registered no. = KSH12
1. Enter slaughter House number
This value can be from 1 to 99..
EX) Slaughter house No. = 1
PRINT
1
PRINT
2 1 H S K
X
ESC
4. Exit menu
If you want to exit, press “ESC” key.
NEW/EDIT SLAUGHTER HOUSE (1/1)
Enter Slaughter House No. : [ 1]
House : [ ]
Country : [ ]
NEW/EDIT SLAUGHTER HOUSE (1/1)
Enter Slaughter House No. : [ 1]
House : [KSH12 ]
Country : [ ]
3. Enter slaughter house country number
You can use contry number which is programmed at
menu 1341
EX) Slaughter house Country No. = 1. KOREA
PRINT
1
NEW/EDIT SLAUGHTER HOUSE (1/1)
Enter Slaughter House No. : [ 1]
House : [KSH12 ]
Country : [ 1]