CAS CL5000 Series - 2.3 Programming PLU Data Table II

62
2.3 Programming PLU Data Table II
2.3.1 Ingredient (Menu code 1310)
(MENU -> 3. PLU Data Table II -> 1.Ingredient)
2.3.2 New/Edit Ingredient (Menu code 1311)
(MENU -> 3. PLU Data Table II -> 1.Ingredient -> 1. New/Edit )
※ You can press the SAVE key at anytime to save the current data and if you want
to exit without saving, press the ESC key.
2. Enter ingredient
EX) Ingredient Line1 = SALT
Ingredient Line 2 = SUGAR
To print “SUGAR” on next line, enter “↵” after
“SALT
”
.
1. Enter ingredient number.
This value can be from 1 to 999.
EX) Ingredient number = 1
PRINT
NEW/EDIT INGREDIENT (1/1)
Ingredient No. : [ 1]
Ingredients : [ ] 1/510
NEW/EDIT INGREDIENT (1/1)
Ingredient No. : [ 1]
Ingredients : [SALT↵SUGAR ] 1/510
1
S A L T
PRINT
↵
S U G A
R
3. Exit menu
If you want to exit, press “ESC” key.
X
ESC
* The number of right side of "[ ]" is digit and total
number of character.
* Pressing "PAGE UP/DN" key turns to next or previous
page.