CAS CL5000 Series - Tare Key (Menu Code 1274); Unit Symbol (Menu Code 1280); NewEdit Unit Symbol (Menu Code 1281)

60
2.2.29 Tare Key (Menu code 1274)
(MENU -> 2. PLU Data Table I -> 7.Tare -> 4.Tare Key )
You can assign Tare Key. There are 9 Tare keys and you have to set these keys in menu
1880 (Key define). See Chapter 2.14.22
2.2.30 Unit Symbol (Menu code 1280)
(MENU -> 2. PLU Data Table I -> 8.Unit Symbol)
You can program unit symbol to print label.
2.2.31 New/Edit Unit Symbol (Menu code 1281)
(MENU -> 2. PLU Data Table I -> 8. Unit Symbol -> 1. New/Edit )
※ You can press the SAVE key at anytime to save the current data and if you want
to exit without saving, press the ESC key.
2. Enter unit symbol
EX) Symbol
=
TH
1. Enter unit number
This value can be from 1 to 8.
EX) Qty Unit No. = 1
PRINT
NEW/EDIT UNIT SYMBOL (1/1)
Qty Unit No. [1]
Symbol : [ ]
NEW/EDIT UNIT SYMBOL (1/1)
Qty Unit No. : [1]
Symbol : [
TH
]
1
CHAR
9
PRINT
9
1. Enter tare Key
EX) Tare Key = 1
TARE KEY (1/1)
Tare Key : [ 1]
Tare No. : [ ]
PRINT
1
2. Enter tare number
EX) Tare No = 1
TARE KEY (1/1)
Tare Key : [ 1]
Tare No. : [ 1] 0.010lb CONTAINER
PRINT
1