CAS CL5000 Series - List Tare (Menu Code 1272); Delete Tare (Menu Code 1273)

59
* If you set Tare No. to 1 when you create PLU, tare is set to 0.010lb that is
programmed here.
2.2.27 List Tare (Menu code 1272)
(MENU -> 2. PLU Data Table I -> 7.Tare -> 2. List )
※ If you want to print list, press the TEST key.
2.2.28 Delete Tare (Menu code 1273)
(MENU -> 2. PLU Data Table I -> 7.Tare -> 3. Delete )
1. Set the list range
Set the range of tare that you wish to check
EX) 1~10
LIST TARE (1/1)
- Start Number : [ 1]
- End Number : [ 10]
List All – Press [SAVE] Key
PRINT
1
PRINT
0 1
No. Reference(descript)
1 1 0.010lb CONTAINER
1. Enter tare number to delete
EX) Delete tare no. 1
DELETE TARE (1/1)
Tare No. : [ 1]
5. Exit Menu
If you want to exit, press “ESC” key.
X
ESC
PRINT
1