CAS CL5000 Series - Adjust Feed Length (Menu Code 1736); Label Preprint (Menu Code 1737); Serial Number Format (Menu Code 1740)

98
2.13.10 Adjust Feed Length (Menu code 1736)
(MENU -> 7. Print -> 3. Printer Hardware -> 6.Adjust Feed Length)
2.13.11 Label Preprint (Menu code 1737)
(MENU -> 7. Print -> 3. Printer Hardware -> 7.Label Preprint)
2.13.12 Serial Number Format (Menu code 1740)
(MENU -> 7. Print -> 4.Serial Number Format)
SERIAL NUMBER FORMAT programming is for numbering of label/ticket issued (printed) on
label/ticket. User may identify daily total counts of label/ticket used up.
After setting all of above H/W setting sub-menus
use “X/ESC” key to go back to
PRINT main menu
X
ESC
Enter any value of the feed alignment from “-200”
to “+200”.
Press “ZERO” to toggle sign.
Press “TEST” to test feed or “ENTER” to save
current “FEED Length value.
* 1pixel = 0.125mm
Ex) “+80” will print 10mm higher.
“-40” will print 5mm lower.
A
DJUST FEED LENGTH (1/1)
Feed Adjustment (-200~+200):[+ 0]
[TEST]=Test, [ZERO]=+ or -
Enter “Y(Yes)” or “N(No)” to select Preprint mode
and any value of the preprint length from “0”mm
to “10”mm.
Press “TES
T
”
to test
p
re
p
rintin
g
.
LABEL PREPRINT (1/1)
Preprint Mode (Y/N) : [ N ]
Preprint Length (0-10) : [ 10]
① Press “4” to go to SERIAL NUMBER FORMAT
menu in PRINT main menu.
4
SERIAL NUMBER FORMAT (1/1)
Label Serial No. : [BBBBB ]
Ticket Serial No. : [%N%O%:AAAAA ]
② Enter appropriate data in [ ].
EX) #0001 on label
RCT#001 on ticket
% # B B B B
PRINT
% R % C % T
A
PRINT
A A
SERIAL NUMBER FORMAT (1/1)
Label Serial No. : [%#BBBB ]
Ticket Serial No. : [%R%C%TAAA ]