LES REPORT (1/1)
Count:296
Total:$6429.48
[TEST]=print & clear
If you select menu code 1620, you will see
following screen.
Are you sure?(1=y/0=N)
Are you sure?(1=y/0=N)
Warning : Paper Type is Label
If you want to print and clear the data, press
TEST key. The scale shows following screen.
If the print mode(paper type) is different,
following message is shown on the display.
Z1 SCALE SALES REPORT (1/1)
Count:296
Total:$6429.48
Wating..
To print and clear, press “1” key. The scale shows
following screen.
REPORT (1/2)
1. X1 Report
2. Z1 Report
3. X2 Report
When printing is done, Z1 data is cleard and exit
this menu.
Sales data is same with X1 report
1
Note 1: If the setting of PARAMETER 598, “Print
when Z Report clear” is “No”, you cannot print Z
Report.
Note 2: If the setting of PARAMETER 595
“Individual clear(Z report)” is “Yes”, you can clear
Scale, PLU, Misc. PLU, Group, Department,
Hourly, Clerk data is cleared separately. But if
you use this function, each report is not same
with scale report.
To Next Page
Loading...
