CAS CL5000 Series - Create By-PCS PLU (Menu Code 1120)

39
2.1.3 Create By-PCS PLU (Menu code 1120)
(MENU -> 1. PLU -> 2.New/Edit)
By-PCS PLU is used depending on the Para 593.
* You can press the SAVE key at anytime to save the current PLU data and if you want to exit
without saving, press the ESC key.
1
PRINT
3
PRINT
1. Enter Department No. / PLU No.
* Department should be set previously
EX) Department # = 1. Default
PLU # = 2
NEW/ EDIT
Department No. : [ 1] Default
PLU No. : [ 3] No Data or Param
2. Select PLU Type
1. By Weight ->
2. By Count ->
3. By PCS ->
EX) BY-PCS Item
PLU No. : 3 (1/△△)
PLU Type : [ 3]
3. By-PCS
[SAVE]=Save [ESC]=Escape
3
PRINT
3. Enter PLU Name1
EX) “CAKE”
PLU No. : 3 (2/△△)
Name 1: [CAKE ]
[SAVE]=Save [ESC]=Escape
C
PRINT
A K E
4. Enter PLU Name2
EX) Do not use name 2
PLU No. : 3 (3/△△)
Name 2: [ ]
[SAVE]=Save [ESC]=Escape
PRINT
5. Enter PLU Name3
EX) Do not use Name3
PLU No. : 3 (4/△△)
Name 3: [ ]
[SAVE]=Save [ESC]=Escape
PRINT
6. Group
* If there is no group data, enter 0
EX) 2.
groceries
PLU No. : 3 (5/△△)
Group : [ 2]
2. Groceries
[SAVE]=Save [ESC]=Escape
2
PRINT