CAS CL5000 Series - User Security Configuration (Menu Code 1850); NewEdit User(Menu Code 1851)

108
2.14.6 User/ Security Configuration (Menu code 1850)
(MENU -> 8. Scale Config -> 5.User/Security Configuration )
This section is to create, edit, change, list, delete clerk’s security information and
configure security level.
2.14.7 New/Edit User(Menu code 1851)
(MENU -> 8. Scale Config -> 5.User/Security Con-> 1. New/Edit )
▶ NEW/EDIT USER in USER’S Security Condition
No. Operation Mode Description
1 Clerk No.
This value can be from 1 to 95.
2 Clerk Name
This value is available up to 22 characters.
3 Nickname
This value is available up to 7 characters. It can be printed
on a label and displayed on the scale.
4 Clerk Password
4 digit (alphanumeric)
5 Clerk Level
0~3 level
Password : When you enter the password, you have to type clerk number(2 digit) and
password(4 digit). For example, if your clerk number is 20 and password is 1234, you
have to type 201234. Minimum password is 3 digit and maximum password is 6 digit.
If there is no level 3 clerk, you can use default value. (Clerk No:1, password:1, Level:3)
Therefore default password is 011.
※ You have to set a level 3 clerk. If there is no level 3 clerk, you can use default
password(011) and if any, you cannot use it.
Enter appropriate USER data for CLERK number,
CLERK NAME, NICKNAME, CLERK PASSWORD,
CLERK LEVEL, and LABEL MESSAGE NO.
EX) CLERK No.=[2],
CLERK NAME=[CHRISTOPER],
NICKNAME=[CHRIS],
CLERK PASSWORD=[0115],
CLERK LEVEL=[3],
Note : If you use floating mode, you have to register all
clerks.
NEW/EDIT USER (1/2)
Clerk No. : [ 2]
Clerk Name : [CHRISTOPER ]
Nickname : [CHRIS]
NEW/EDIT USER (2/2)
Clerk Password : [ 0115 ]
Clerk Level : [ 3 ]