CASE CONSTRUCTION Alpha Series - Page 108

3-CONTROLSANDINSTRUMENTS
(17)TEXTDISPLAY:
Thisdisplaywillshowthefollowingduring
normaloperation,asselectedbythe
operator.
•
EngineHours:Enginehourswillalways
bedisplayedmomentarilywhenthe
operatorinitiallysitsintheseat.The
operatormaychoosetoleaveengine
hoursondisplaycontinuouslyorselect
oneofthefollowing.
•
EngineRPM
•
EngineCoolantTemperature(degreesF
orC)
•
HydraulicOilTemperature(degreesFor
C)
•
Cycle:Ifthisdisplayoptionischosen,the
displaywillcontinuouslycyclethroughall
fouroftheaboveitems
Thetextdisplaywillalsohelptheoperator
ortechnicianwithinformationastheSETUP
menuisutilized.
NOTE:Tochangedisplaymode"onthego"
holdtheAUXOVERRIDE(11)untilthecur-
rentoptionnameisdisplayed,pushtheAUX
OVERRIDEbuttonrepeatedlyuntildesired
optionnameisdisplayed.Thisdisplaymode
valuewillcontinuetobeshownuntilanother
selectionismade.
931093307
3-48