CASE CONSTRUCTION Alpha Series - Page 94

3-CONTROLSANDINSTRUMENTS
Disconnecttheattachment
NOTE:Unlikethestandardauxiliaryhydraulicsorthehigh
owauxiliaryhydraulicsyoudonothavetoreleasehy-
draulicpressurefromthesystembeforedisconnectingthe
attachmentsauxiliaryhoses.
1.Lowertheloaderarmallthewaydownandensure
thattheloaderarmorattachmentisnotsupporting
theweightofthemachinewiththefrontwheelsoffthe
ground.
2.Placeallcontrolsintheneutralposition.
3.PresstheOperatebuttontodeactivatethehydraulic
systemandgrounddrivesystem.
4.Stoptheengine.
5.Movethecontrolstoensurethatthehydraulicinterlock
isengagedandtheloaderarmandbucketcylindersdo
notmove.
6.Raisetherestraintbar,unfastentheseatbelt,and
safelyexitthemachine.
7.Disconnecttheelectricalconnectorandinstallthecap.
8.Disconnectthe5/8inchenhancedhighowattach-
menthydraulichosesfromthequickdisconnects.
9.Installthecouplercovers,ifequipped.
3-34