Chapter 4 – How to Use the Illuminator
Section 4.8 – Unload the Processing Set(s)
4-18
Refer to the Instructions for Use in the INTERCEPT Processing Set for
the next steps in the process.
Process
Additional
Blood
Products
1. Press the ‘Treatment’ button. The ‘Enter username’ screen will
appear
2. Repeat the steps described earlier, beginning with Section 4.2,
to enter username and password (optional).
NOTE:
To go directly to the ‘Select a function’ screen from the ‘Unload
containers’ screen, press the ‘Function’ button.
To Next Page
Loading...