CERUS INTERCEPT INT100 - • From the ‘Select Data To Export’ screen, use the arrow buttons to choose the ‘Export All Service Data’ option. Press the ‘Enter’ button to select the ‘Export All Service Data’ option.; • The ‘Export all service data’ screen will appear. To cancel before the export operation begins, press the ‘Cancel’ button.; • To start exporting all service data, press the ‘Export’ button. The ‘Exporting service data’ screen will appear. Alternatively, if the ‘Export’ button is NOT pressed, the ‘Exporting service data’ screen will appear automatically after a short delay.; • When the export operation is finished, ‘Completed’ pop-up window will appear. Press the ‘OK’ button.

Chapter 3 – Illuminator Description
Section 3.7 – Illuminator Settings
3-44
Export All
Service Data
Use ‘Export All Service Data’ to export all service data to a host
computer.
• From the ‘Select Data To Export’ screen, use the arrow buttons
to choose the ‘Export All Service Data’ option. Press the
‘Enter’ button to select the ‘Export All Service Data’ option.

NOTE: After ‘Enter’ is pressed, there may be a delay while the illuminator
prepares the files. DO NOT re-press ‘Enter’.
• The ‘Export all service data’ screen will appear. To cancel
before the export operation begins, press the ‘Cancel’
button.
• To start exporting all service data, press the ‘Export’ button.
The ‘Exporting service data’ screen will appear. Alternatively,
if the ‘Export’ button is NOT pressed, the ‘Exporting service
data’ screen will appear automatically after a short delay.

NOTE: To stop exporting at any time during the export process, press the
‘Cancel’ button. The ‘Export will be canceled’ pop-up window will
appear. Press the ‘OK’ button to cancel the export operation.
• When the export operation is finished, ‘Completed’ pop-up
window will appear. Press the ‘OK’ button.
MAN-EN 00601, v3.0