CERUS INTERCEPT INT100 - • From the ‘Select Data To Export’ screen, use the arrow buttons to choose the ‘Export All Treatments’ option. Press the ‘Enter’ button to select the ‘Export All Treatments’ option.; • The ‘Export all treatment records’ screen will appear. To cancel before the export operation begins, press the ‘Cancel’ button.; • To start exporting all treatment records, press the ‘Export’ button. The ‘Exporting treatment records’ screen will appear. Alternatively, if the ‘Export’ button is NOT pressed, the ‘Exporting treatment records’ screen will appear automatically after...; • When the export operation is finished, the ‘Completed’ pop-up window will appear. Press the ‘OK’ button.

Chapter 3 – Illuminator Description
Section 3.7 – Illuminator Settings
3-42
Export All
Treatments
Use ‘Export All Treatments’ to export all treatment records in the system
memory to a host computer.
• From the ‘Select Data To Export’ screen, use the arrow buttons
to choose the ‘Export All Treatments’ option. Press the ‘Enter’
button to select the ‘Export All Treatments’ option.

NOTE: After ‘Enter’ is pressed, there may be a delay while the illuminator
prepares the files. DO NOT re-press ‘Enter’.
• The ‘Export all treatment records’ screen will appear. To
cancel before the export operation begins, press the
‘Cancel’ button.
• To start exporting all treatment records, press the ‘Export’
button. The ‘Exporting treatment records’ screen will appear.
Alternatively, if the ‘Export’ button is NOT pressed, the
‘Exporting treatment records’ screen will appear
automatically after a short delay.

NOTE: To stop exporting at any time during the export process, press the
‘Cancel’ button. The ‘Export will be canceled’ pop-up window will
appear. Press the ‘OK’ button to cancel the export operation.
• When the export operation is finished, the ‘Completed’ pop-
up window will appear. Press the ‘OK’ button.
MAN-EN 00601, v3.0