CERUS INTERCEPT INT100 - Chapter 4: Performing Illumination Treatments

Chapter 4 – How to Use the Illuminator
4-1
Chapter 4 How to Use the Illuminator
SECTIONS PAGE
4.1 Introduction 4-3
4.2 Turn On the Illuminator and Enter Credentials 4-4
4.3 Load Processing Set(s) 4-6
4.4 Scan Barcodes 4-11
4.5 Repeat Set Loading for Container 2 4-13
4.6 Begin Illumination Process 4-14
4.7 Illumination Interruption 4-15
4.8 Unload the Processing Set(s) 4-16
4.9 Optional Printing Treatment 4-19
Reports and Additional Labels
4.10 Change Users Before the 4-28
Next Illumination Cycle
4.11 Turn Off the Illuminator 4-29
4.12 Questions and Answers 4-30
MAN-EN 00601, v3.0