CERUS INTERCEPT INT100 - • Print the last treatment manually; • Print a specific treatment; • Print a shift report; • Print treatments in a date range

Chapter 4 – How to Use the Illuminator
Section 4.9 – Optional Printing Treatment Reports and Additional Labels
4-19
Section 4.9 Optional Printing Treatment Reports and
Additional Labels
When the illuminator is configured to print reports (refer to Section
3.7, Illuminator Settings, for details), the following options are
available:
• Print the last treatment manually
• Print a specific treatment
• Print a shift report
• Print treatments in a date range
• Print labels
The following paragraphs describe how to create these reports
once the printer is connected and the illuminator is configured.
(Refer to Section 3.7 for illuminator configuration and to Section 7.5
for connecting external devices.)
When the auto-printing option is chosen, the last treatment
report(s) will automatically be printed when the procedure is
complete during the container unloading. No further operator
intervention is required.

NOTE:
If the status of the treatment is unknown, review the treatment
report to verify the status.
MAN-EN 00601, v3.0