Chapter 3 – Illuminator Description
Section 3.7 – Illuminator Settings
3-23
• Use the arrow buttons at the right of the screen to choose the
date format. Your choices are month/day/year,
day/month/year or year/month/day.
• Press the ‘Enter’ button to select the format. The ‘Enter date’
screen will appear.
• Use the keypad (to the left of the screen) to enter the date
manually. The illuminator will automatically take you to the
next field (for example, month or year) when you have
entered the numbers.
NOTE:
You must enter 2 numbers for the ‘month’ and ‘day’ fields and
4 numbers for the ‘year’ field. (For example: 01/01/2002).
• Press the ‘Enter’ button when the date has been entered. The
‘Select a time format’ screen will appear.
• Use the arrow buttons to choose the time format. Your
choices are a 12-hour clock or a 24-hour clock.
NOTE:
If using a data management system, select the 24-hour clock
format.
• Press the ‘Enter’ button to select the format. The ‘Enter time’
screen will appear.
• Use the keypad to enter the time manually.
• Press the ‘Enter’ button when the time has been entered.
NOTE:
You must enter 2 numbers for the ‘hour’ and ‘minute’ fields.
(For example: 01:30).
• If you selected the 12-hour clock, then the ‘Select 12 hour
period’ screen will appear. Use the arrow buttons at the right
of the screen to choose whether the time is ‘Morning: am’ or
‘Evening: pm’.
• Press the ‘Enter’ button to select the time period. A
confirmation screen will appear.
• If you selected the 24-hour clock, the confirmation screen will
appear.
• If the date and time are incorrect, press the ‘Edit’ button to
return to the ‘Select 12 hour period’ screen.
• If this screen is incorrect, press the ‘Back’ button to find the
incorrect screen. Repeat the above steps to correct the
information.
To Next Page
Loading...