CESAB S210 User Manual

© Cesab 8 – 10 T Code(s): 841, 842, 843
Repair manual: Troubleshooting Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
2:102
Configuration error.
Truck configuration
does not match
parameter 1102
Creep speed,
blocked lifting/
lowering
movement
Incorrect value for
parameter 1102
1: Check parameters
• Check that factory parameters
are set according to the truck
configuration.
• Check that other parameters
are set correctly.
2:180
Internal program
error
Creep speed,
blocked lifting/
lowering
movement
Internal program
error
• Create a truck report. Send a
report to the manufacturer.
• Update the truck software to the
latest version.
2:285
Incorrect signal
combination from
the support arm
position sensor
Creep speed,
blocked lifting/
lowering
movement
1: High signal
from both B62
and B65
2: Constantly
high signal at
inputs (T1:94)
and (T1:87)
1: Check the sensor signal
• Check that the distance
between the sensor and the
opposite part is correct.
• Check that there is no dirt or
foreign objects on the sensor
• Inspect cabling.
• Measure the signals from the
sensor with a volt meter and
verify using TruckCom or the
built-in test that the signal is
correct
2: Check the signal to the unit
• Compare the signals from the
sensor with the input signal (use
a volt meter and verify using
TruckCom or the built-in test
that the signals are the same)
• Check the pins on the unit and in
the connector
• Replace the unit if you cannot
get it to work properly
Code Description
Truck
behaviour
Error cause(s) Procedure
https://www.forkliftpdfmanuals.com/

CESAB S210 Specifications

General

Brand	CESAB
Model	S210
Category	Trucks
Language	English