Configuring an Alert for a Non-Synchronized Policy Server
R81 Harmony Endpoint Server Administration Guide|167
Configuring an Alert for a Non-Synchronized
Policy Server
You can configure the Endpoint Security Management Server to send an email alert to one or
more people if one or more of the Policy Servers are not synchronized with the Endpoint
Security Management Server.
It is important for all the Endpoint Policy Servers to have the same information about the
Endpoint Security Management Server, because if they are not synchronized, the environment
may be in a non-stable state.
You can configure how often the Endpoint Security Management Server sends the Policy
Server out-of-sync alert, and whether it sends an alert when the Policy Server is back in sync.
Before Configuring a Policy Server Out-of-Sync Alert
Configure an email server (see
"Configuring an Email Server" on page60
).
To Configure a Policy Server Out-of-Sync Alert:
1. In SmartEndpoint, go to the Reporting tab.
2. In the Alerts section, click Policy Server out of sync.
3. Enable the alert so that it is ON.
4. Click Configure.
The Alert Configuration window opens.
5. Add one or more people who will get an email about the alert. In Add New Recipient, for
each person you want to add, type an email address and click Add.
6. Configure when an alert is sent. Select one or two of:
n
Notify on alert activation - Email alert is sent when the Policy Server is out of sync.
n
Notify on alert resolution - Email alert is sent when the Policy Server is back in
sync.
7. Set how often the alert will be sent. In Remind every, select one of these time periods:
1 Day
1 Hour
6 Hours
3 Days
To Next Page