External PKI Certificates for Client-Server Communication
R81 Harmony Endpoint Server Administration Guide|32
4. Select Push CA Certificate and click Next.
5. Select the computers to push the certificate to.
6. Click Next.
7. Click Manage.
8. Select the certificate and click Assign.
9. Optional: Enter a descriptive Comment.
10. Click Next.
11. Click Finish.
A SmartEndpoint notification shows the number of clients the certificate was pushed to.
See the Push Operations report in the Reporting tab for more information about the
operation.
Installing SSL Certificates on Servers
To install an SSL certificate on an Endpoint Security server:
1. Open SmartEndpoint.
2. Go to Manage > Endpoint Servers.
3. Select a server and click Edit.
The Endpoint Server Wizard opens.
4. Click Next.
5. Click Manage to select an SSL certificate for the server.
6. Select the relevant certificate from the list and click Assign.
Note - The server name in the Issued To field of the selected SSL certificate should be
identical to the server's DN. Hover over the selected certificate to see the complete
information.
7. Click Next.
8. Select the server with the new certificate to Install Database.
9. Click Finish.
See The installation process finished.
10. In a High Availability environment, Install Database again on the secondary server.
To Next Page
Loading...
