Configuring Offline Mode
R81 Harmony Endpoint Server Administration Guide|421
Configuring Offline Mode
Manage the offline policies for the Endpoint Security client components that are supported in
Offline Mode from each Offline Group in the Users and Computers tab. The policies for users
in these groups are not configured in the Policy tab and are not included in policy installation.
1.
Create a new Offline Group and configure the sub-paths and settings
Each Offline Group defines the location for its files and the included policies.
Computers that install the package do not show in the tree on the Users and
Computers tab.
For each group you configure a root path of the shared location where files for the
group are stored, and sub-paths for each type of file. You must manually create each
sub-path. Folders for these files are required. The default location is under the root
path:
n
Updates - Policy updates.
n
Client Logs - The location where logs from clients in this group are stored.
n
Recovery Files - Full Disk Encryption recovery files.
n
Upgrades - Upgrades to new client versions.
n
Installation - Complete installation packages.
To create an Offline Group:
a. In the Users and Computers tab navigation tree, right-click on Offline Groups
and select New Offline Group.
The New Offline Group wizard opens
b. Enter this information:
n
Offline group name - A name for the group
n
Root Path - The root path of the shared location where files for this group
are stored. This must be a valid UNC path or HTTP/HTTPS path. For
example, \\server\share\ or http://server/share/. HTTP and
HTTPS paths are only supported when the WebDAV extension is enabled
on the web server.
n
Description (optional) - Helpful information about the group or policies
c. Click Sub-paths.
The Sub-path Settings window opens.
To Next Page
Loading...
