Check Point HARMONY R81 - VPN Client Verification

VPN Client Verification
R81 Harmony Endpoint Server Administration Guide|359
VPN Client Verification
The VPN Client Verification action selects the procedure used to enforce the Upon verification
failure option that is defined in SmartConsole, in Menu > Global Properties > Remote Access
> Secure Client Verification (SCV). The procedures are:
n
VPN Client verification process will use Endpoint Security Compliance - Uses the
Endpoint Security policy to control access to organizational resources.
n
VPN Client verification process will use VPN SCV Compliance - Uses SCV (Security
Configuration verification) settings from the Security Gateway to control access to
organization resources. SCV checks, which are defined in the Local.scv policy, always
run on the client. This option is described in the " Secure Configuration Verification
(SCV) " section of the E80.72 and higher Remote Access clients for Windows
Administration Guide .
Note - Endpoint Security clients on Mac always get their compliance status from
Endpoint Security Compliance, even if VPN Client verification process will use
VPN SCV Compliance is selected.