Management High Availability
R81 Harmony Endpoint Server Administration Guide|175
The Edit String window opens.
4. Copy the number in the Value data field. This is the PAT version number.
To change the PAT version on the server:
1. Open a command prompt.
2. Run the Endpoint Security Management Security utility (uepm.exe) and set the new
PAT version:
uepm
patver
set
<old_PAT_version_number>
+
10
3. Make sure the new PAT version is set by running:
uepm patver get
Deleting a Server
You can delete a Remote Help server or a Secondary Endpoint Security Management Server.
Before you do that, make sure none of the remaining servers have connectivity to the deleted
entities.
To Next Page