Monitoring Endpoint Security Deployment and Policy
R81 Harmony Endpoint Server Administration Guide|59
Alerts
The alerts pane shows which endpoint computers are in violation of critical security rules.
These violation types can trigger alerts:
n
Certificate Expiration
n
Compliance Warning
n
Deployment Failed
n
Encryption Problem
n
Anti-Malware Issues
The lower section of the pane contains two tabs:
n
Trend - Shows a line chart showing the trend of security violations over time
n
Endpoints - Shows the standard endpoint computer list
Configuring Alert Messages
You can configure Endpoint Security to send different types of messages.
Message
Type
When Sent Comments
Initial Alert Number of endpoints with security violations
exceeds the specified threshold
Shows the number of
endpoints with violations and
the violation type
Alert
Reminder
Repeatedly according to a specified
frequency as long as the number of
endpoints exceeds the threshold
Shows the number of
endpoints with violations and
the violation type
Alert
Resolved
Number of endpoints with security violations
falls below the specified threshold
Shows that the alert has
been resolved
To define security alerts:
1. On the Alerts pane, select a security violation and click Configure.
The Alert Configuration window opens.
2. Select how the amount of endpoints that trigger alerts are measured:
n
Percentage - The percentage of endpoints in the environment.
n
Absolute values - The number of endpoints in the environment.
3. Select a percentage or absolute value for the fields:
To Next Page
Loading...
