Check Point HARMONY R81 - Synchronizing MSI Files, Dynamic Packages and Drivers

Management High Availability
R81 Harmony Endpoint Server Administration Guide|172
Synchronizing MSI Files, Dynamic Packages
and Drivers
Each time you download a new MSI package, Dynamic Package or a driver related to
Endpoint Security client, for example, a Smart Card driver, you must manually synchronize
these files in all the High Availability environments. The synchronization is not performed
automatically due to large file size.
To synchronize MSI Files, Dynamic Packages and Drivers:
1. Manually copy the MSI folder to the Standby servers.
Note: The MSI folder contains many folders with unique names. When you add a new file
to a folder on the Active server, copy this file to the same folder on the Standby server.
a. On the Active Security Management Server, copy these folders:
n
$FWDIR/conf/SMC_Files/uepm/msi
n
$FWDIR/conf/SMC_Files/uepm/packages
n
$FWDIR/conf/SMC_Files/uepm/recimg
n
$FWDIR/conf/SMC_Files/uepm/archives
b. On the Standby Security Management Server, replace theses folders with the
folders that you copied from the Active Security Management Server:
n
$FWDIR/conf/SMC_Files/uepm/msi
n
$FWDIR/conf/SMC_Files/uepm/packages
n
$FWDIR/conf/SMC_Files/uepm/recimg
n
$FWDIR/conf/SMC_Files/uepm/archives
c. If necessary, manually copy the Smart Card drivers:
$FWDIR/conf/SMC_Files/uepm/DRIVERS