Users and Computers Tab
R81 Harmony Endpoint Server Administration Guide|57
Users and Computers Tab
The nodes of the Users and Computers tree are filled automatically by an Active Directory
scan, or when installed Endpoint Security clients connect to the Endpoint Security
Management Server.
The only node whose contents you define and manage is the Networks node.
To create a network:
1. Open the Users and Computers tab.
2. Right-click Networks and select New Address Range.
The Address Range Properties window opens.
3. Enter a name for this address range.
4. Enter the first IP address and the last IP address of the range.
5. Add a descriptive comment, and select a color.
6. Click OK.
To Next Page
Loading...
