Check Point HARMONY R81 - Changing a Users Password

Changing a User's Password
R81 Harmony Endpoint Server Administration Guide|244
Changing a User's Password
Users can change their own passwords from the Pre-boot. You can manage user Pre-boot
passwords from the User Details window.
To change a user's Pre-boot password from SmartEndpoint:
1. In the User Details > Security Blades > OneCheck User Settings in the Pre-boot
authentication method area, click Change Password.
2. In the Change User Password window, enter the new password and re-enter it.
3. Click OK.
4. Click OK.
5. Select File > Save.