Password Complexity and Security
R81 Harmony Endpoint Server Administration Guide|232
Password Complexity and Security
Policy view > OneCheck
These Actions define the requirements for user passwords for OneCheck User Settings:
Action Description
Use Windows
password
complexity
The standard Windows password requirements are enforced:
The password must:
n
Have at least six characters
n
Have characters from at least 3 of these categories:
uppercase, lowercase, numeric characters, symbols.
Use custom
password
complexity
If you select this, select the requirements for which type of
characters the password must contain or not contain.
Double-click an action to edit the properties:
Option Description
Use custom
requirements
If you select this, select the requirements for which type of
characters the password must contain or not contain:
n
Consecutive identical characters, for example, aa or 33
n
Require special characters. These can be: ~ = + - _ ()
' $@ , .
n
Require digits, for example 8 or 4.
n
Require lower case characters, for example g or t.
n
Require upper case characters, for example F or G.
n
Password must not contain user name or full name.
Minimum length of
password
Enter the minimum number of characters for a valid password.
Password can be
changed only after
Enter the minimum number of days that a password must be valid
before the user can change it.
Password expires
after
Enter the maximum number of days that a password can be valid
before the user must change it.
Number of
passwords
Enter the minimum number of password changes needed before a
previously used password can be used again.
To Next Page
Loading...
