Check Point HARMONY R81 - Creating a Device with Automatic Device Discovery

Defining Exceptions for Devices
R81 Harmony Endpoint Server Administration Guide|259
n
Allow encryption - Select this option if the device can be encrypted (storage devices
only).
n
Can generate device arrival audit event - Select this option to create a log entry when
this device connects to an endpoint computer (Event ID 11 or 20 only).
Creating a Device with Automatic Device Discovery
You can use the Device Discovering Wizard to create new devices that have been connected
to endpoint computers.
To create a device with the Device Discovering Wizard:
1. Open the Storage Devices Read Access, Storage Devices Write Action, or Peripheral
Devices Access action.
2. In the Device Overrides section of the Edit Properties window, click Add device.
3. In the Device Override Settings window, select Create a new device.
4. Click Next.
5. Select Add discovered device from user logs.
6. Click Next.
7. Select a device from the list. If necessary, search or filter to find the device.
8. Click Next.
9. Optional: Edit the device details. See "Editing Device Details" on the previous page .
10. Click Next.
11. Optional: Add this device to one or more device groups (storage devices only).
12. Click Next.
13. Define the behavior of the device. The options shown are based on which action you are
editing:
n
For Storage Devices Write Access see "Configuring a Write Action" on page252 .
n
For Storage Device Read Access see "Configuring the Read Action" on page251 .
n
For Peripheral device access:
l
Access type: Block or Allow
l
Log type: Log or None
14. Click Finish.